Amazing secret - How to choose the high frequency welding machine manufacturers - The manufacturers do not tell you
01. Method one:
The machine ground-press platen is placed behind the mold, in front of the ground is obsolete technology
02. Method two:
After placing the ground -press platan, touch the machine table below,
If there is no numbness in the hand, the hand pain discomfort, then means a good high-frequency output ,
On the contrary, it must be a high-frequency leakage,will radiate body
03. Method three:
When the machine output high-frequency, use a screwdriver to tap on the upper electrode,
If the spark out of a small, blue and crisp, high-frequency treatment is good,
On the contrary, carefully the risk of high frequency processing technology
04. Method four: long mold, to weld short material
For example with 100cm molds, to weld 40cm material,
At this time, there is no material contacts at both ends of the mold from the lower table within 1mm,
If the high frequency handled properly, spark will burn the mold.
05. Method five: high-frequency radiation measuring instruments,
High frequency output, the radiation measuring instruments, measuring the output value, to meet European or
international standards
06. Method six: Automatic high-cycle compensation system
To display manufacturers, has automatic high-cycle compensation system
In addition, when welding mat, carpet embossing, multi layer welding materials, to achieve multistage automatic
compensation for high cycle output.
Machine features:
Applied for tents,canvas,tarapulin,pvc membrane,pvc fabric,truck cover,agaicultural canvas,canopy,membrane structure,
tent house,gas storage bag,flexi tank,inflatable boat,inflatable castle,stretched ceiling structures and other pvc based
plastic welding applcation
Enjoy big free space behind electrode;feactured with deep and wide material-feeding tank
European standard high-frequency oscillatory square box,more reliable and stable in output
Adopting high sensitive 5557 anti-flash device to avoid damaging the machine and mould.
Laser-light material position guiding device;
Ground-press platen is behind welding mould to protect workers from hurt hands;
Input air-filtering design to protect inside electronic parts;
Optional Function:Auto-Tuning Systerm
